Some features of beckman.com will be unavailable from 8:00 p.m. PDT Saturday, December 7 until 12:00 a.m. PDT, Sunday, December 8 for planned maintenance. During this time, you will not be able to log in to use account features such as online shopping, shopping lists and order tracking.
Please ensure your orders are processed prior to this maintenance period or contact Client Services for additional assistance. Dismiss
Multisizer 4e Features
Aperture sizes from 10 µM – 2 mm let you measure particles from 0.2 μm – 1,600 μm to meet current/future needs.
Multiple aperture choices enable overlay of data collected from different apertures so you can analyze complex samples with wide particle size distribution.
Multi-parametric analysis provides data on particle number, volume, mass and surface area size distributions from one measurement.
Proven Coulter principle technology detects particles independently of refractive index, color or composition, so you can measure any particle that can be dispersed in an electrolyte solution.
Signal processing system increases dynamic range and reduces noise for small particle detection.
Supports use of 5 mL Nalgene™ vials to help preserve precious samples.
Automatic detection of aperture blockages ensures worry-free operation.
Automated routines and easy-to-use wizards help you design experiments regardless of your experience level.
Multiple SOM/SOP configurations and V-check validation package help simplify Quality Assurance.
With no licensing restrictions, software can be installed on multiple computers for offline processing, which frees up the instrument to run samples and helps maximize operational efficiency.
Represents proven technology defined by the International Standard ISO 13319, with 9 approved ASTM methods.
Beckman Coulter, Inc. All rights reserved.
NOT ALL PRODUCTS ARE AVAILABLE IN ALL COUNTRIES.
PRODUCT AVAILABILITY AND REGULATORY STATUS DEPENDS ON COUNTRY REGISTRATION PER APPLICABLE REGULATIONS
The listed regulatory status for products correspond to one of the below:
IVD: In Vitro Diagnostic Products. These products are labeled "For In Vitro Diagnostic Use."
ASR: Analyte Specific Reagents. These reagents are labeled "Analyte Specific Reagents. Analytical and performance characteristics are not established."
CE: Products intended for in vitro diagnostic use and conforming to European Directive (98/79/EC). (Note: Devices may be CE marked to other directives than (98/79/EC)
RUO: Research Use Only. These products are labeled "For Research Use Only. Not for use in diagnostic procedures."
LUO: Laboratory Use Only. These products are labeled "For Laboratory Use Only."
No Regulatory Status: Non-Medical Device or non-regulated articles. Not for use in diagnostic or therapeutic procedures.